Aerial map
You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Back to all reports

Brewers Hill Road approaching the lights at High Street North

Reported via desktop in the Drains/Ditches Blocked category anonymously at 22:04, Thu 1 July 2021

Sent to Central Bedfordshire Council less than a minute later. Council ref: 358661.

Photo of this report zoom
Photo of this report zoom

Since the road was re-jigged by the new Printworks development, Brewers Hill Road floods when it rains. This is both at the corner and by the raised zebra crossing. The wash from passing cas is soaking the pavement and any passing pedestrians There are drains in the roadside, but the are either inadequate or blocked. Also, with the change of road layout the traffic flow is congested with a pinch point approaching the high street from Brewers Hill Road, due to the widened path, especially or traffic turning left or going straight on.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Photo of this report zoom
    Photo of this report zoom

    Picture this afternoon Sunday 4-Jul-2021

    Posted anonymously at 23:45, Sun 4 July 2021

  • Thank you for contacting us with information relating to a Highways issue. We plan to inspect the site during the next instance of significant rainfall (that takes place during working hours) and decide on the best course of action.

    State changed to: In progress

    Posted by Central Bedfordshire Council at 09:19, Mon 5 July 2021

  • Thank you for your Highways report.
    Following you report we have carried out an inspection and raised an order to repair your identified issue and this has now been added to our programme of works.

    Many thanks,
    Central Bedfordshire Council Highways

    State changed to: Action scheduled

    Posted by Central Bedfordshire Council at 15:41, Wed 7 July 2021

Only the original reporter may leave updates. If you made the original report please log in to leave an update.